Rustic Wrapped Burlap DIY Christmas Tree

I love the texture of burlap. I think it adds a rustic warmth to home decor. Today I created a simple DIY Christmas tree, that would be easy to customize with color or pattern. There are so many options of printed burlap these days. I chose to keep mine traditional, unadorned burlap. This took about 40 minutes to throw together, and would be darling as a multi-sized trio.

Supplies needed to make your own burlap DIY Christmas tree:

• 2.5″ Natural Burlap Accent Wrap (this roll contains 10 yards of burlap- I used more than half of the roll)
• Paper Mache Cone (I used 13.75 inch)
• 3D Wooden Star
• Hot Glue Gun/Glue Sticks
• Glue Gun Helper Set – (Finger Protectors)
• Silver Paint
• Black Ink Pad

Choose a roll of burlap that is no less than 2.5″ wide and 6-7 yards long. Loosely wrap your burlap around the base of your cone. Make sure you have about a 1″ overlap.

Cut the burlap at the overlap. Run a thin line of hot glue down the upper seam of the burlap wrap and fold the wrap in half lengthwise to adhere.

I highly recommend wearing protective Hot Glue Gun helps for this step. Burlap is very loose in texture, and the glue seeps right through.

When the edges are adhered, it will resemble a burlap tube.

Apply hot glue to the pinched edge of the tube, and adhere it around the perimeter of the base of the cone.

Get as close to the bottom as you can with the first row.

Continue to add rows of burlap in the same manner. Try to space your rows as close together. This will add fullness to your completed DIY Christmas tree.

As the cone gets smaller, you will need to “ruffle” the burlap by pinching the burlap as you adhere it to the cone. Don’t worry about the burlap rows being perfect.

The top rows will be really weird looking because the cone is so narrow. This is okay.

When all of the burlap rows are adhered, then begin cutting the burlap into approximately 1- 1 1/2″ sections. Use sharp scissors for this part.

Alternate the cut lines, row by row, so they are staggered. Continue until all the rows of burlap are cut.

Add your painted wooden star to the top of the DIY Christmas tree using hot glue. I painted mine silver, and then added black ink to make it look like an aged pewter.

That’s it, your burlap DIY Christmas tree is done! You can easily customize the material to fit your decor.

Want another fun DIY Christmas tree craft idea? Check out this adorable craft stick Christmas tree craft!

Shaunte

Shaunte is a 30-something, chocolate-loving, SAHM from Utah. She has been scrapbooking since 1997, the dreaded era of photos cropped with deco scissors. Since then, her work has evolved into a clean, linear, photo-focused style. Her favorite subjects to scrap are her husband and five kids (never a lack for subject material there).